To a great extent, industrial production and processing industries rely on the error-free judgment of gas, liquid, and chemicals flowing through the pipelines. For this reason, flow meters play an important role in most medium and large industrial installations worldwide. A Flow Meter is an instrument used to measure the linear, nonlinear, mass, or volumetric flow of gas, oil, or liquids. It can be either an open channel flow meter or a closed conduit. It is mostly a closed conduit in industries where the flow is through a tube or pipe. The most important reason for requiring a flow meter is to monitor the safety conditions in and around the factory due to the flow of liquids and gas. Other than this, the bubbles and presence of abrasives have to be removed, thereby improving transmission qualities.
The force required to move the flow of gas or liquid is by pressure. While choosing a flow meter, the technician should note the instrument’s effectiveness, types of data needed, and the frequency of collecting the volume flow. You may find more information right here at www.silverinstruments.com so that you can place orders for suitable flow meters and the prices of each type.
Flow Measurement and Types of Flow Meters
Flow Measurement is therefore paramount when it comes to the security of the industry’s internal environment. Making error-free judgment can speed up the process without causing any damages or leakages. As different industries have different applications, flow meters, including the gas flow meter, are also varied. You can find Obstruction type flow meters, Electromagnetic types, Inferential Turbine types, Fluid Dynamic types, Anemometer, Ultrasonic, Positive Displacement Flowmeters, Ultrasonic, and Mass flow meters.
Flow is measured by analyzing the velocity of fluid over a specific area. If the flow is large, then tracer methods are used by examining the rate of change in the concentration of a dye or radioisotope. It can have a disastrous effect if a wrong flow meter is chosen during chemical processing. If, on the other hand, you had installed a faulty Flow Meter, then it can be very dangerous, and there will be no end to troubles that it can generate.
Study the Viscosity of Fluids
It would help if you chose the most suitable flow meter by determining the viscosity of fluids that passes through the factory’s pipelines. On the other hand, if you have no idea, it is better to seek advice from a technical expert. Simple flow meters are good for the general measurement of liquid that passes through the pipeline. It gives approximately 5% accuracy. However, if your requirement is small, then this is enough.
It is noteworthy that each gas and fluid behaves differently, and the fluid’s viscosity is affected. It is therefore important that you know the range of pressure and degree of the temperature of fluid or gas flow in your factory so that you can buy a suitable gas flow meter.
The above company also manufactures Paperless Recorder for customers to record measurement data. These recorders provide data to multiple departments speedily.